Category Archives: Uncategorized

Robotic Zipper paper wins Best Paper in Mechanisms and Design at IROS 2026!

This work is in collaboration with Allison Okamura’s CHARM LAB at Stanford.

Thank you to the Futures Fund for their support in continuing next phases of this project.

Design, Modeling, and Performance of a Robotic Zipper  for Self-Donning Clothing

Weckerly, Amanda; Kim, Wooseok; Coram, Megan C.; Li, Ellen; Lin, Sophie; Unger, Gabriel; Szabo, Isabella; Okamura, Allison M.; Sung, Cynthia

Design, Modeling, and Performance of a Robotic Zipper for Self-Donning Clothing (Conference)

IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2026, (Best Paper in Robot Mechanisms and Design).

(Abstract | BibTeX | Links: )

Abstract: Dressing is a basic activity of daily living that can be difficult for individuals with mobility or dexterity limitations, resulting in the need for adaptive garments. We propose self-donning apparel enabled by robotic zippers and integrated seam design. The robot features a motor-driven spur gear that interlocks with zipper teeth, along with a snap-on mechanism for attachment and removal from the garment. We present a quasistatic analysis of the forces applied by the robotic zipper to the garment, quantifying how garment weight, orientation, and local curvature influence the required motor torque. Torque scales linearly with garment mass and depends on orientation, ranging from 0.045 N·m/kg for horizontally supported garments to 0.11 N·m/kg for vertically hanging garments. Across fabric entry angles, motor torque for untensioned garments varies by at most 3.7%, indicating minimal sensitivity to entry angle under low fabric tension. The zipper robot continuously traverses fabric curvatures with radii as small as 10 mm for untensioned fabric and 20 mm for fabric tensioned to 2.9 N, representative of tight-fitting garments. These operating limits inform seam patterning for the design of future garments assembled by robotic zipping. The robotic zipper is integrated into garments with zipper pathways, curvatures, materials, and donning strategies of varying complexity, demonstrating both single- and multi-robot configurations for self-donning clothing.

Congrats to Ellen, Sophie, and Gabe for their upcoming IROS paper being nominated as a finalist for Best Paper in Mechanisms and Design!

Design, Modeling, and Performance of a Robotic Zipper  for Self-Donning Clothing

Weckerly, Amanda; Kim, Wooseok; Coram, Megan C.; Li, Ellen; Lin, Sophie; Unger, Gabriel; Szabo, Isabella; Okamura, Allison M.; Sung, Cynthia

Design, Modeling, and Performance of a Robotic Zipper for Self-Donning Clothing (Conference)

IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2026, (Best Paper in Robot Mechanisms and Design).

(Abstract | BibTeX | Links: )

Abstract: Dressing is a basic activity of daily living that can be difficult for individuals with mobility or dexterity limitations, resulting in the need for adaptive garments. We propose self-donning apparel enabled by robotic zippers and integrated seam design. The robot features a motor-driven spur gear that interlocks with zipper teeth, along with a snap-on mechanism for attachment and removal from the garment. We present a quasistatic analysis of the forces applied by the robotic zipper to the garment, quantifying how garment weight, orientation, and local curvature influence the required motor torque. Torque scales linearly with garment mass and depends on orientation, ranging from 0.045 N·m/kg for horizontally supported garments to 0.11 N·m/kg for vertically hanging garments. Across fabric entry angles, motor torque for untensioned garments varies by at most 3.7%, indicating minimal sensitivity to entry angle under low fabric tension. The zipper robot continuously traverses fabric curvatures with radii as small as 10 mm for untensioned fabric and 20 mm for fabric tensioned to 2.9 N, representative of tight-fitting garments. These operating limits inform seam patterning for the design of future garments assembled by robotic zipping. The robotic zipper is integrated into garments with zipper pathways, curvatures, materials, and donning strategies of varying complexity, demonstrating both single- and multi-robot configurations for self-donning clothing.

Congratulations to Dongsheng Chen and Shivangi Misra for defending their PhD Dissertations!

Dongsheng’s thesis: Design, Performance Analysis and Motion Control of a Jet-Propelled Soft Robotics Platform

Monitoring underwater ecosystems is critical for assessing marine biodiversity and tracking the ongoing impacts of global climate change. Bio-inspired soft robots present an ideal solution for these environments, leveraging morphological mimicry, physical compliance, and low-acoustic locomotion to enable the non-disruptive observation of aquatic life. In this thesis, we investigate a squid-inspired, jet-propelled robotic platform, presenting contributions in its mechatronic design, performance analysis, and autonomous motion control.

Specifically, we developed a variable-volume, jet-propelled robot. The robot simulates the pulsatile dynamics of biological squids; its consistent kinematics and modular design enable it as a versatile testbed for studying complex fluid-structure interactions and validating motion control frameworks. By leveraging the system’s modularity, we adapt the robot to emulate the jetting mechanics of a biological salp and conducted an experimental analysis on the influence of unidirectional versus bidirectional flow regimes on the platform’s propulsive efficiency. Based on the experiment results, we formulated design guidelines to decide the selection between unidirectional and bidirectional flow regimes in jet-propelled aquatic systems. Finally, to achieve autonomous 2D planar locomotion, we integrated a steerable nozzle into the testbed architecture. Considering the highly nonlinear dynamics of the platform, we developed a Reinforcement Learning (RL) motion controller. This control policy was initially trained and validated within a custom dynamic simulation environment before being successfully deployed onto the physical hardware, demonstrating the efficacy of the closed-loop control framework.

Shivangi’s thesis: Modeling and Motion Planning for Robotic Systems with Networked Compliance

Physical compliance enters robotic systems either by design, to yield gracefully to disturbances, or by circumstance, as a property of the environment or task itself. Often this compliance is distributed across many interacting elements, and how those elements are connected determines whether their combined effect on the robot’s configuration can be resolved locally or as a coupled system. In this talk, I will discuss how to model and plan over two such systems: a soft manipulator arm with tunable stiffness elements, and a physically connected team of mobile robots that cooperatively traverse deformable, slip-prone terrain. We use a graph-theoretic model of the connected compliant elements in each system to capture how motion is coupled to the underlying forces. Leveraging its model, the soft arm motion planner adjusts internal stiffness to redistribute forces resulting in a target shape, while for the connected robot team, where terrain compliance is fixed, the planner reasons over modeled interaction forces to select robot actions that guide the team toward a goal. In each case, the same underlying model supports planning across a range of network topologies and terrain conditions.